Product Overview
JMTC High Force Wastegate Actuator
Description
The JMTC High Force Wastegate Actuator is an upgrade to the OEM wastegate which helps the turbo reach and hold higher boost pressures without a pre-load adjustment. however it still can be used as an OEM replacement providing better response and and able to hold higher boost pressures. The JMTC high force waste gate fits the Peugeot Citroën with the THP prince engine and the rear discharge turbochargers (see applicable pn below).
When the waste gate actuator is not operating properly because the diaphragm has been damaged it can cause boost pressure deviation error code 2885. Replace it with one of our new high force wastegates so you can reach full boost again.
K03 Fits all 06 to current, Turbochargers 5303 988 0120 5303 970 0120, 53039880120, 53039700120, 5303-988-0120 5303-970-0120, 53039880120 53039800120 53039900120, 53039700120, 53039700121 53039800121, 53039880121, 53039880121 53039700121, 5303-988-0121 5303-970-0121, 5303 988 0121, 5303 970 0121, 53039880104 53039700104, 5303 988 0104 5303 970 0104, 5303-988-0104, 5303-970-0104 5303-970-0117 5303-988-0117 5303 970 0117 5303 988 0117 53039700117 53039880117, 5303-770-0476 JMTC S42-P, E45HP-P,
K04 Fits all 06 to current JMTC, GTD47-P turbochargers
Note doesn't fit the RCZ 200 or 270.
